PVT heat pump
A heat pump without an outdoor unit
The PVT Heat Pump 5 is a water-to-water heat pump that provides heating, hot water and active cooling. Instead of a traditional outdoor unit, it uses silent PVT panels on the roof as its heat source. This makes the system virtually silent, compact and ideal for fully gas-free homes.
The Triple Solar PVT Heat Pump 5
The PVT heat pump is designed for efficient operation in the Dutch climate and runs automatically with only a small number of PVT panels.
It uses the natural refrigerant propane (R290) and offers remote monitoring via IoT. Its lightweight design and practical connections make installation quick and straightforward. The system is also listed in the National Environmental Database (NMD), meaning its environmental performance has been independently verified.
Go fully gas-free
Looking to remove gas completely? With the PVT Heat Pump 5, it’s possible.
The system provides both space heating and hot water — without using gas.
Switching to PVT can reduce CO₂ emissions from heating by 50–65%, depending on your home, insulation and energy use. It can also lower your monthly costs. While electricity use increases, you eliminate gas bills and fixed connection charges — often resulting in lower overall expenses.
Designed for every home
The PVT Heat Pump 5 is an ideal solution for homes where an outdoor unit is not desired or not feasible. Because the system operates without an outdoor unit, there is no external noise and no concerns about noise regulations at the property boundary. Thanks to its compact design, the heat pump can be installed easily in almost any technical space.
| Description | Unit | Value | |
|---|---|---|---|
| Output* | B0-W35 | kW | 1.0 – 5.8 |
| Seasonal efficiency** | (annual, up to) | SCOP/SPF | 5.5 |
| Flow temperature | Max. | °C | 70 |
| Natural refrigerant | Min. | °C | -20 |
* The PVT heat pump can supply 100% of a home’s heating demand via the compressor for a property with an annual energy consumption of 7,500 kWh, with a SCOP of 4.8.
** The PVT heat pump can supply 96% of a home’s heating demand via the compressor for a property with an annual energy consumption of 11,000 kWh, with a SCOP of 4.5 (calculated using the Appendix Q calculation method from the Heat Pump Association for low-temperature heating and average energy consumption).
Key benefits
High efficiency
Efficient use of generated electricity with a SCOP of up to 5.4 (depending on conditions).
Low-maintenance
No outdoor components means no mandatory annual servicing.
Minimal environmental impact
No ground drilling and no outdoor unit required.
Sustainable
Manufactured using European materials and fully recyclable
Lightweight
At just 63 kg, easy to install.
7-year warranty
Designed for a lifespan of 25+ years with a 7-year guarantee.
How the PVT heat pump works
The system operates as a water-to-water heat pump and follows three stages:
Modular design
The Triple Solar PVT Heat Pump 5 features a modular design, allowing components to be quickly replaced in the event of a fault.
All-electric Module
- Three-way valve for domestic hot water
- Electric heating element (1–6 kW)
- Pressure sensors in the primary and secondary circuits
- Air vent
Logic Module
- 3,5″ touchscreen
- Opentherm-regeling
- Simkaart en optionele LAN-aansluiting
Heat pump Module
- Modulating compressor (1.0–5.8 kW)
- Four-way valve for active cooling
- Primary and secondary circulation pumps
Sustainably manufactured in Europe
Where possible, we use materials and components sourced from within Europe. By working with European suppliers and production facilities in Denmark, Amsterdam and Emmen, we reduce transport distances.
